What port does RIP use?

RIP uses port 520 by default. The protocol is defined in RFC 2453.

Unknown

Routing Information Protocol

Q: What is Routing Information Protocol?

Routing Information Protocol (RIP) is a Network Layer protocol in the Routing category. Distance-vector routing protocol using hop count as metric with a maximum of 15 hops. Simple to configure but slow to converge. Largely replaced by OSPF and EIGRP in modern networks.

Network Layer — Routing

Protokol Genel Bakış

Tam Ad Routing Information Protocol

Kısaltma RIP

OSI Katmanı Network Layer

Kategori Routing

Varsayılan Port 520

RFC RFC 2453

Hakkında RIP

Distance-vector routing protocol using hop count as metric with a maximum of 15 hops. Simple to configure but slow to converge. Largely replaced by OSPF and EIGRP in modern networks.

Network Layer Routing Port 520

Standartlar Referansı

RIP, Internet Engineering Task Force (IETF) tarafından yayımlanan RFC 2453 belgesinde tanımlanmıştır. RFC'ler, internet protokolleri için resmi standart belgeler olup kamuoyunun incelemesi için serbestçe erişilebilir durumdadır.

İlgili Protokoller — Network Layer

WireGuard WireGuard IPsec Internet Protocol Security IPv4 Internet Protocol version 4 IPv6 Internet Protocol version 6 ICMP Internet Control Message Protocol BGP Border Gateway Protocol OSPF Open Shortest Path First IGMP Internet Group Management Protocol