Design Addressing for a 50-Person Office

Intermediate Design

Question

You need to design an IP addressing scheme for a 50-person office using the network 192.168.1.0/24. The office has four departments: Staff (30 hosts), Servers (10 hosts), IoT (5 hosts), and Guest WiFi (20 hosts). Allocate a subnet for each department using VLSM. Minimize wasted addresses while leaving room for growth.

Given

{
  "network": "192.168.1.0/24",
  "departments": [
    {
      "name": "Staff",
      "hosts": 30
    },
    {
      "name": "Servers",
      "hosts": 10
    },
    {
      "name": "IoT",
      "hosts": 5
    },
    {
      "name": "Guest WiFi",
      "hosts": 20
    }
  ]
}

Answer

{
  "subnets": [
    {
      "department": "Staff",
      "subnet": "192.168.1.0/26",
      "usable_hosts": 62,
      "range": "192.168.1.1 - 192.168.1.62",
      "broadcast": "192.168.1.63"
    },
    {
      "department": "Guest WiFi",
      "subnet": "192.168.1.64/26",
      "usable_hosts": 62,
      "range": "192.168.1.65 - 192.168.1.126",
      "broadcast": "192.168.1.127"
    },
    {
      "department": "Servers",
      "subnet": "192.168.1.128/28",
      "usable_hosts": 14,
      "range": "192.168.1.129 - 192.168.1.142",
      "broadcast": "192.168.1.143"
    },
    {
      "department": "IoT",
      "subnet": "192.168.1.144/28",
      "usable_hosts": 14,
      "range": "192.168.1.145 - 192.168.1.158",
      "broadcast": "192.168.1.159"
    }
  ],
  "remaining": "192.168.1.160/27, 192.168.1.192/26",
  "total_allocated": 152,
  "total_usable": 256
}

Try to solve it first, then click Reveal Answer

Step-by-Step Explanation

Step 1: Sort departments by required hosts (largest first)

VLSM allocates subnets greedily from largest to smallest to avoid fragmentation:

Department Required Hosts
Staff 30
Guest WiFi 20
Servers 10
IoT 5

Step 2: Choose prefix length for each department

Formula: 2^(32 - prefix) - 2 >= required hosts

  • Staff (30 hosts): Need at least 32 addresses → 2^6 = 64, prefix = /26 (62 usable) ✓
  • Guest WiFi (20 hosts): Same calculation → /26 (62 usable) ✓
  • Servers (10 hosts): Need at least 12 → 2^4 = 16, prefix = /28 (14 usable) ✓
  • IoT (5 hosts): Need at least 7 → 2^4 = 16, prefix = /28 (14 usable) ✓

Step 3: Allocate subnets sequentially

Starting from 192.168.1.0:

192.168.1.0/26     → Staff        (192.168.1.0  - 192.168.1.63)
192.168.1.64/26    → Guest WiFi   (192.168.1.64 - 192.168.1.127)
192.168.1.128/28   → Servers      (192.168.1.128 - 192.168.1.143)
192.168.1.144/28   → IoT          (192.168.1.144 - 192.168.1.159)
192.168.1.160/27   → (reserved/future, 30 usable)
192.168.1.192/26   → (reserved/future, 62 usable)

Step 4: Verify no overlaps

Each subnet block ends before the next begins: - /26 = 64 addresses: 0–63, 64–127 - /28 = 16 addresses: 128–143, 144–159

No overlaps exist. ✓

Step 5: Key outputs per subnet

Subnet Network First Host Last Host Broadcast
Staff 192.168.1.0 .1 .62 .63
Guest 192.168.1.64 .65 .126 .127
Servers 192.168.1.128 .129 .142 .143
IoT 192.168.1.144 .145 .158 .159

Design Notes

  • Guest WiFi is isolated in its own subnet, preventing guests from reaching Staff or Server subnets without routing policy
  • IoT isolation is critical for security — limit routing from IoT subnet to Servers
  • 96 addresses remain unallocated for future growth

Related Terms

More Design Worksheets