VLAN Addressing for a Multi-Floor Building
Intermediate DesignQuestion
A 4-floor office building uses 192.168.0.0/22 as its total address space. Each floor has 3 VLANs. Design a hierarchical scheme where each floor receives a /24 block, and each VLAN within a floor receives a /26 subnet. List all 12 VLANs with their subnets.
Given
{
"network": "192.168.0.0/22",
"floors": 4,
"vlans_per_floor": 3
}
Answer
{
"floor_blocks": [
{
"floor": 1,
"block": "192.168.0.0/24"
},
{
"floor": 2,
"block": "192.168.1.0/24"
},
{
"floor": 3,
"block": "192.168.2.0/24"
},
{
"floor": 4,
"block": "192.168.3.0/24"
}
],
"vlans": [
{
"floor": 1,
"vlan": 1,
"subnet": "192.168.0.0/26",
"range": "192.168.0.1 - 192.168.0.62"
},
{
"floor": 1,
"vlan": 2,
"subnet": "192.168.0.64/26",
"range": "192.168.0.65 - 192.168.0.126"
},
{
"floor": 1,
"vlan": 3,
"subnet": "192.168.0.128/26",
"range": "192.168.0.129 - 192.168.0.190"
},
{
"floor": 2,
"vlan": 1,
"subnet": "192.168.1.0/26",
"range": "192.168.1.1 - 192.168.1.62"
},
{
"floor": 2,
"vlan": 2,
"subnet": "192.168.1.64/26",
"range": "192.168.1.65 - 192.168.1.126"
},
{
"floor": 2,
"vlan": 3,
"subnet": "192.168.1.128/26",
"range": "192.168.1.129 - 192.168.1.190"
},
{
"floor": 3,
"vlan": 1,
"subnet": "192.168.2.0/26",
"range": "192.168.2.1 - 192.168.2.62"
},
{
"floor": 3,
"vlan": 2,
"subnet": "192.168.2.64/26",
"range": "192.168.2.65 - 192.168.2.126"
},
{
"floor": 3,
"vlan": 3,
"subnet": "192.168.2.128/26",
"range": "192.168.2.129 - 192.168.2.190"
},
{
"floor": 4,
"vlan": 1,
"subnet": "192.168.3.0/26",
"range": "192.168.3.1 - 192.168.3.62"
},
{
"floor": 4,
"vlan": 2,
"subnet": "192.168.3.64/26",
"range": "192.168.3.65 - 192.168.3.126"
},
{
"floor": 4,
"vlan": 3,
"subnet": "192.168.3.128/26",
"range": "192.168.3.129 - 192.168.3.190"
}
],
"usable_per_vlan": 62,
"reserved_per_floor": "192.168.x.192/26 (62 addresses for future 4th VLAN)"
}
Try to solve it first, then click Reveal Answer
Step-by-Step Explanation
Step 1: Understand the available space
192.168.0.0/22: - /22 = 1,024 addresses - Range: 192.168.0.0 – 192.168.3.255 - This spans four consecutive /24 blocks (192.168.0.x through 192.168.3.x)
Step 2: Assign one /24 per floor
Each /24 provides 256 addresses — enough for 3 VLANs of /26 (62 usable each) with room to spare.
| Floor | /24 Block |
|---|---|
| Floor 1 | 192.168.0.0/24 |
| Floor 2 | 192.168.1.0/24 |
| Floor 3 | 192.168.2.0/24 |
| Floor 4 | 192.168.3.0/24 |
Step 3: Sub-divide each /24 into /26 VLANs
A /24 holds exactly 4 × /26 subnets (4 × 64 = 256 addresses):
Offsets within each /24:
VLAN 1: .0/26 (usable: .1 – .62, broadcast: .63)
VLAN 2: .64/26 (usable: .65 – .126, broadcast: .127)
VLAN 3: .128/26 (usable: .129 – .190, broadcast: .191)
VLAN 4: .192/26 (RESERVED for future expansion)
Step 4: Full 12-VLAN table
| VLAN ID | Floor | Subnet | First Host | Last Host | Broadcast |
|---|---|---|---|---|---|
| F1-V1 | 1 | 192.168.0.0/26 | .0.1 | .0.62 | .0.63 |
| F1-V2 | 1 | 192.168.0.64/26 | .0.65 | .0.126 | .0.127 |
| F1-V3 | 1 | 192.168.0.128/26 | .0.129 | .0.190 | .0.191 |
| F2-V1 | 2 | 192.168.1.0/26 | .1.1 | .1.62 | .1.63 |
| F2-V2 | 2 | 192.168.1.64/26 | .1.65 | .1.126 | .1.127 |
| F2-V3 | 2 | 192.168.1.128/26 | .1.129 | .1.190 | .1.191 |
| F3-V1 | 3 | 192.168.2.0/26 | .2.1 | .2.62 | .2.63 |
| F3-V2 | 3 | 192.168.2.64/26 | .2.65 | .2.126 | .2.127 |
| F3-V3 | 3 | 192.168.2.128/26 | .2.129 | .2.190 | .2.191 |
| F4-V1 | 4 | 192.168.3.0/26 | .3.1 | .3.62 | .3.63 |
| F4-V2 | 4 | 192.168.3.64/26 | .3.65 | .3.126 | .3.127 |
| F4-V3 | 4 | 192.168.3.128/26 | .3.129 | .3.190 | .3.191 |
Step 5: Routing and summarization
Each floor's /24 can be summarized to a single route in the core switch:
- ip route 192.168.0.0/24 <floor1_switch>
- ip route 192.168.1.0/24 <floor2_switch>
- etc.
All floors can further be summarized as 192.168.0.0/22 to an upstream router.